PROBA 5
Doc.nr: 170366
Version: 1.1
Page
24
of
32
Fig. 38
Control panel - Setting the clocks
You can now configure the time and date. Use the >> and << symbols to synchronise the clocks of the
Proba (MC3 Controller) and the touchscreen. Here it is important to know which of the two clocks is
displaying the right time and date. If neither of the two clocks is correct, adjust the time and date by
pressing the relevant fields and filling in the correct data.
Once you have configured everything correctly, press ‘Apply’ to activate the settings.
Press
∑
to return to the main screen.
3.2.2 The main screen
The main screen displays the status of the Proba.
Besides the average control temperature, the status of the outputs are also displayed.
From the main screen, you can move to sub-screens on which you can display extra information and
define a number of parameters.
3.2.2.1 Registration
Before you can adjust the settings, you must first enter a code. To enter this code, press the closed
black padlock. After you enter the correct code, the padlock changes into an open blue padlock.
Not registered
Registered
Fig. 39
Control panel - Registration
