MC2-FC mode FC
Document no.:200064
Version: 1.5
Page 18 of 44
2.2.9
Access code page
This page is displayed automatically if an access code is required for a parameter change. That can
be defined with a parameter (P904). The access code in question can be entered using the numeric
keys, followed by the "OK" button to finish.
2.2.10
Temperature set point page
This page is displayed when the control temperature is pressed on cell page 1. You can use the arrow
to adjust the temperature set points and differential. The values can also be entered numerically. To
do this, you must click the appropriate field. A blue border is then displayed around the field. You can
use the "Del" button and the number keys to change the value. Press the "OK" button to confirm the
input. Incorrect or invalid input values are displayed in red.