9
Dual Record (Continuous & Event Record)
The continuous record fps is 1fps and the file will be stored on the “Normal” folder.
Event recording will work according to the fps setting, for example 30 frames per
second recording and the file will be stored in the “Event” folder
Drive Data (DRV file)
The DRV (Drive Data) file will record during driving even if there are no events or
video footage. The DRV file consists of GPS and G-sensor data, and it helps to find
specific data or driving behaviour. The DRV file overwrites the oldest data. The DVR
files will be made every 10 minutes.
G-Sensor Calibration
G-Sensor Calibration is needed after installing the
VCS2500
.
1. Install the unit and park the vehicle on a flat surface.
2. Turn on the unit and press the small red button for three seconds.
3. Calibration will be complete with a “beep” sound.
Built-in Power Backup (Super Capacitor)
When power to the unit is interrupted, the
VCS2500
creates the last
file using the internal Super Capacitor.
When events are triggered continuously, for every event, 20 seconds post-recording
from the time of the event will be added to the event data file with a maximum
recording time of 3 minutes. When this 3 minutes is reached, the file will be split and
a new file will be created but the data will be continuous.
VCS2500 INSTALLATION GUIDE
t
0333 009 0456 |
e
w
www.vcs.systems
