15
Appendix (Upgrade)
1. Prepare Firmware
Make a folder called “program” on the SD root folder, as shown below:
Copy the “XXXXXX_x.x.x.img” file to the SD card “program” folder.
2. Upgrade VCS2500
Insert the prepared SD card to
VCS2500
unit and turn on the power.
The
BLUE
&
RED LED
will blink while the unit is upgrading. It will also ‘beep’
continuously. Upgrading the unit usually takes about 30 seconds.
WARNING:
Do not turn off the power during the upgrade.
If the upgrade fails, the
VCS2500
unit should be returned to your local
Once the upgrade is finished, the unit will automatically turn off and on the power.
VCS2500 INSTALLATION GUIDE
t
0333 009 0456 |
e
w
www.vcs.systems
