VBrick Systems Portal Server ETV v4.1, Admin Manual, Page: 131 / 140

Amino Set Top Box
ETV Portal Server Admin Guide 121
11. Click on
Watch live broadcasts
, for example, to display the Live Broadcasts page
(Figure 14). You can use this page to select any available MPEG-2 stream.
Figure 14. Live Broadcasts Page
Changing the IP Address
Once the Amino is initially configured as explained above, you can change the IP address as
necessary using the wireless keyboard.
T
To change the IP address:
1. Go to the Amino MCS home page (Figure 13) and press
Ctrl
on the keyboard.
2. Click
OK
to toggle the
Default Amino Keys
to
On
.
3. Press
Alt-m
on the keyboard and use the steps listed above in Configuring the Amino to
set a new IP address.
4. Press
Ctrl
again to toggle off the
Default Amino Keys
and resume normal operation.
Configuring the Remote Control for a TV
The Amino handheld IR remote control is designed to work with the Amino set top box.
During normal operation, the
STB/TV
button (see the Portal Server User Guide ) should be set
for
STB
. It can, however, be configured to work with a standard TV. In order for the remote
to transmit the correct signals to control the TV, it must be programmed with a 3-digit code
that matches the TV. See the Amino Remote Controls User Guide for more information.
Configuring the Amino for a Widescreen
This procedure explains how to configure an Amino Set Top Box for MPEG-2 output to a
widescreen (16:9) TV. Use one of the following methods depending on whether you are using
the handheld remote control or the wireless keyboard.
When done, repeat these steps if necessary
for each Amino set top box.
T
To configure for widescreen with the wireless keyboard:
1. Press
Ctrl
to get into Amino keyboard mode.