V B R I C K E T H E R N E T V S E T T O P B O X U S E R S G U I D E
V E R S I O N 3 . 6 . 9
Local Mode
Watch Television
The administrator can set a default
channel to be viewed when the unit
is powered on through the web
browser interface in Configuration
Options. This is done by setting the
receive address or URL in the Video
Setup Configurations. Please refer
to the Administrator Settings in the
Chapter Two of this document.
2
1
3
To watch the programmed channel,
use the IR remote control unit to
Watch TV
c
and use the left button
to select.
Full Screen
To set the video to full screen, start
the video in the Preview Window
d
.
Use the button with the outward
facing arrows below the window
e
to
select Stop, or Full Screen mode or
use the IR remote control unit to
position the cursor over the button
and use the Left IR remote control
button to select.
5
Use the IR remote control unit to
position the cursor over top portion
of the screen until the control bar
appears
g
. Position the cursor,
using the IR remote control unit, over
the button with the inward facing
arrows and use the Left IR remote
control button to select. To stop the
video, select the square .
NOTES:
In order to leave one stream selection and choose another, it is necessary to first
stop the video.
When playing a new stream, the last frame of the previous stream persists for a few
seconds.
C O P Y R I G H T V B R I C K S Y S T E M S
P A G E 1 9
N O V E M B E R 1 0 , 2 0 0 3
