V B R I C K E T H E R N E T V S E T T O P B O X U S E R S G U I D E
V E R S I O N 3 . 6 . 9
Standard Administrative Settings
It is necessary to login before making changes.
Network Static IP Address
1
The EtherneTV Set Top Box comes configured
for DHCP and set in Local Mode. To change
to a static IP address, Use the Network:
Ethernet settings.
Uncheck the box for DHCP Enable.
Uncheck the box for DNS via DHCP.
Uncheck the box for Hostname via
DHCP.
Enter a Hostname, if desired.
Enter the static IP address, Netmask
and Gateway.
Apply
c
must be selected before the
changes will take effect.
Local Mode Settings
Use the Video: Setup settings to enable or
change these and other selections:
Boot Mode –
Change the setting to:
Local
Local-Full Screen
Receive Address –
The receive address or
URL of the desired video. There are six options
for stream type:
NOTE:
It is possible to use a hostname or
numeric IP address wherever an <ipaddr> is
called for (only if the hostname is in the
DNS server).
Multicast MPEG-1
RTSP@MULTICAST_MPEG1://group:port/
Multicast MPEG-2
RTSP@MULTICAST_MPEG2_TRANSPORT://group:port/
Multicast MPEG-4
(a) Please refer to the release notes for information on how to FTP the
SDP file to the SET TOP BOX,
(b) RTSP@ISMA_SDP_FILE:///wfs/<path to file>,
e.g. RTSP@ISMA_SDP_FILE:///wfs/mpg/currentmp4.sdp
RTSP MPEG-1 for
Video on Demand
(EtherneTV VOD)
RTSP@KASENNA_MPEG1://<ipaddr>/program
RTSP MPEG-2 for
Video on Demand
(EtherneTV VOD)
RTSP@KASENNA_MPEG2_TRANSPORT://<ipaddr>/program
RTSP MPEG-4
Internet Streaming
Media Alliance (ISMA)
RTSP@ISMA://<ip addr>/program
(e.g. RTSP@ISMA://172.22.117.2/vbrickvideo1
or
RTSP@ISMA://172.22.119.119/Complete-Movies/enterprogramname)
C O P Y R I G H T V B R I C K S Y S T E M S
P A G E 1 3
N O V E M B E R 1 0 , 2 0 0 3
