VBrick Systems EtherneTV MPEG-1, Admin Manual

Page: 17 / 58

Configuration
STB Admin Guide 11
Table 1. Receive Address Syntax
Local-Fullscreen Mode with MPEG-4 Multicast
To decode multicast MPEG-4 in Local-Fullscreen mode, you can put an SDP file on the set
top box using the set top box internal FTP server as shown in the sample FTP session below.
T
To decode multicast MPEG-4:
1. First, obtain an SDP file for the MPEG-4 multicast stream. When streaming from an
MPEG-4 encoder, see the VB4000-5000-6000 Administrator Guide for information
about SDP files.
2. Use an FTP client to place the SDP file on the set top box. A sample FTP session to use
an set top box with the IP address of 172.22.117.70 is shown below. (Server prompts are
shown in
bold .)
Multicast MPEG-1
RTSP@MULTICAST_MPEG1://group:port/
Multicast MPEG-2
RTSP@MULTICAST_MPEG2_TRANSPORT://group:port/
Unicast or Multicast MPEG-4 with
Remote SDP File
http://<ipaddr>/<path_to_remote_file>
Unicast or Multicast MPEG-4 with
Local SDP File
RTSP@ISMA_SDP_FILE:///wfs/<path_to_local_file>
,
e.g.
RTSP@ISMA_SDP_FILE:///wfs/mpg/currentmp4.sdp
See Local-Fullscreen Mode with MPEG-4 Multicast for
information on how to FTP the SDP file to the set top
box.
Unicast MPEG-1
RTSP@UNICAST_MPEG1://#dataPort=<port>
Unicast MPEG-2
RTSP@UNICAST_MPEG2_TRANSPORT://#dataPort=<port>
RTSP MPEG-1 for Video on Demand
(EtherneTV NXG only)
RTSP@KASENNA_MPEG1://<ipaddr>/program
RTSP MPEG-2 for Video on Demand
(EtherneTV NXG only)
RTSP@KASENNA_MPEG2_TRANSPORT://<ipaddr>/program
RTSP MPEG-1 for Video on Demand
(EtherneTV VoD-W only)
RTSP@INFOVALUE_MPEG1://<ipaddr>/program
RTSP MPEG-2 for Video on Demand
(EtherneTV VoD-W only)
RTSP@INFOVALUE_MPEG2_TRANSPORT://<ipaddr>/
program
RTSP MPEG-4 Internet Streaming
Media Alliance (ISMA)
(Live or VoD)(
RTSP@ISMA://<ip addr>/program
(e.g.
RTSP@ISMA://172.22.117.2/vbrickvideo1
--or--
RTSP@ISMA://172.22.119.119/Complete-Movies/
enterprogramname)
Video can be streamed over UDP or TCP. See RTSP
Streaming on page 13 for options.
Note If necessary you can FTP the SDP file to the set top box as described here.
However the recommended method is to retrieve the SDP file via HTTP.