background image

Configuration

STB Admin Guide

19

System Update

These parameters are used to set system update options. See System Upgrade on page 27 for 
a description of this procedure.

Language

Not used. Do not change from factory defaults.

Hardware

The only user-selectable option on Hardware menu is 

Mouse Type

. If you connect a USB 

mouse to the USB port on back of STB, you must change this setting to 

USB

 or the mouse 

will not work.

Watchdog Frequency

Default = 0 which means never reboot; 1 means reboot every 
day; 2 means reboot every second day, and so on. Watchdog 
Time is used in conjunction with Watchdog Frequency. 

Watchdog Time

Choose time (on 24-hour clock) that this unit will restart.

Enable Gateway Validation Specifies whether the network gateway should be validated at 

startup. Default = Enable.

FTP Server

The location of the external FTP server from which the STB will 
access system update files.

Relative Directory 
Path

Location of system update files on the external FTP server. For 
example, if system update files are located in /user/r370 and the 
home directory is /user, then enter r370 in this field.

FTP User

Username used to log into the external FTP server.

FTP Password

Password used to log into the external FTP server.

Update Proxy

Not used.

Update Proxy Port

Port used for the proxy server.

Always Full Updates This option should always be checked. This option determines 

whether or not partial or full updates should be performed. 

Auto Check for 
Update

This option should always be unchecked. It determines whether or 
not the STB should check for code updates at initial startup.

Run Post-Update 
Script

This option should always be unchecked.

Summary of Contents for EtherneTV MPEG-1



























































Reviews: