VBrick Systems EtherneTV MPEG-1, Admin Manual

Page: 50 / 58

44 EtherneTV Media Distribution System
Figure 3. MCS Mode
Using the IR Remote
The remote control unit is an infrared remote control device you point at the sensor on the
front of the STB above the LEDs. As described below, the buttons on the remote control only
work if the STB is configured for
MCS
or
Local
mode. If configured for
Local-Fullscreen
,
you can only use the
Volume
and
Mute
buttons. See Start Mode on page 10 for more
information. The buttons on the handheld IR remote control are described in the following
table from left to right and top to bottom.
Note If playing a file on an NXG VOD server in Local mode, the
Play
button on the IR
remote will start (or re-start) the video from the beginning. For best results, use the
Channel
and
Select
buttons rather than the mouse controls.