12
www.vbike.ca
vBike Canada
As soon as the safety clasp is locked, move the safety pin sideways thus it is inserted into the clasp
and locked it in place.
UnFolding the Bike
vBike electric bike folds at the handlebars, pedals and in the center of the frame.
Pull the handlebars to the upright position and push the clasp down tightly.
Stand near where the battery is exposed. Grab the suspension fork and rear end of the bike, lift the
bike slightly off the ground and swing the bike to its unfolded position. Make sure all the wires are
completely inside the frame.
First Step: Unfolding The Frame
Close the latch by turning it 180 degrees to the lock position and you will hear the click. Make sure
it is completely locked.
Put the kickstand in the upright position.
Second Step: Unfolding The Handlebar
U-Lock
Third Step: Unfolding the Pedals
Pull up the pedal from the folded position toward the unfolding position.
After unfolding the pedal make sure to hear the click. In this way, the pedal is locked into an
unfolded position.
