BAG MARKED
STEP7-8
10
© VBC Racing LIGHTNING12
M2.5x8 Cap Head Screw C-02-SC-R2508 x 1
Servo And Top Plate Assembly
7
Ball Differential Assembly
M3x6x0.5mm Spacer B-02-VBC-5093 x 4
M3x8 Roundhead C-02-SC-R0308 x 4
Servo Spacer B-02-VBC-5013 x 2
Alum Servo Mount B-02-VBC-5012 x 2
Aluminum Wheel Hub, Left
B-02-VBC-5079 x 1
3 Difference Servo Adaptor
For Sanwa/KO [A) /Futaba [F] /JR/Hitec [H]
Turnbuckle Cup (Long) A-03-VBC-5016 x 4
42mm Turnbuckle, Black B-02-VBC-5014 x 2
M3 Locknut C-02-SC-NN03 x 2
Ball Connector 4.7x12mm A-02-VBC-5015 x 2
Servo Saver Set
M2.5x8 Cap Head
26mm
Turnbuckle Cup (Long)
42mm Turnbuckle, Black
Turnbuckle Cup (Long)
M3x6x0.5mm Spacer
M3x6x0.5mm Spacer
M3x8 Roundhead
M3x8 Roundhead
1mm Servo Spacer
Note : Use this Spacer To
adjust the ackerman
Alum Servo Mount
Ball Connector 4.7x12mm
M3 Locknut
Make sure the screw is
correct for your servo
<< LEFT >>
<< RIGHT >>
Optional : Tie Rod Wrench Set D-05-VBC-0048 (not included)
SERVO IS NOT INCLUDED
8
This side into axle
Servo Saver Set B-03-VBC-5017 x1
