BAG MARKED
STEP7-8
7
Steering System Assembly
06
© VBC Racing FLASH04
Steering Travel Plate A-03-VBC-1010 x 1
Steering Arm A-03-VBC-1008 x 2
16mm Servo Mount Support A-03-VBC-1067 x 1
Ball Connector B-02-VBC-0045 x 3
5x8 Ball Bearing C-02-BB-0805-B x 4
3x6 Ball Bearing C-02-BB-0603 x 2
Steering Cone Washer B-02-VBC-0089 x 2
M3x6 Roundhead C-02-SC-R0306 x 2
M3x8 Set Screw C-02-SC-SS-0308 x 4
Turnbuckle Cup A-03-VBC-0039 x 2
Make 2 steering link tie-rods, follow the connector cups directions as
the above diagram. The connector cups edge to edge shall be 20mm.
Please use a caliper to measure the exact measurement
M3x32mm Turnbuckle B-02-VBC-0036 x 2
Turnbuckle Cup S A-03-VBC-0056 x 2
M3x32mm Turnbuckle
Turnbuckle Cup F
Turnbuckle Cup
Turnbuckle Cup F
Turnbuckle Cup
M3x8 Set Screw
M3x6 Set Screw
M3x8 Set Screw
Steering Travel Plate
Steering Arm
Steering Arm
Ball Connector
Ball Connector
16mm Servo Mount Support
5x8 Ball Bearing
5x8 Ball Bearing
5x8 Ball Bearing
5x8 Ball Bearing
Steering Cone Washer
Steering Cone Washer
M3x6 Roundhead
M3x6 Roundhead
Thead Lock
Thead Lock
3x6 Ball Bearing
3x6 Ball Bearing
Thead Lock
Thead Lock
Thead Lock
Thead Lock
M3x6 Set Screw C-02-SC-SS-0306 x 4
20mm
12mm
8mm
6mm
12mm Servo Mount Support A-03-VBC-1068
8mm Servo Mount Support A-03-VBC-1069
6mm Servo Mount Support A-03-VBC-1070
This kit provides additional Servo Mount
Supports in different heights. Please make
sure the servo link turnbuckle is parallel to
the Steering Travel Plate. You may need
these Servo Mount Supports for different
types of servos.
