Vaya V9, User Manual, Page: 6 / 16

PO-1684
6
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
Step 1: Getting started – Take your scooter out of the box and place it flat on the floor.
Step 2: Charging your scooter – Make sure the scooter is fully charged before your initial use. For charging instructions,
please follow details under the battery and charging specifications.
Step 3: Wear all proper safety gear, including but not limited to a helmet, knee pads, elbow pads and wrist guards.
GETTING STARTED
ASSEMBLY
Attach the handlebar. Insert the screw and tighten them using the included hex-key.
WARNING: The 4 screws keep the handle attached to the front bar so important that they are securely attached. Do
not use too much force when securing the screws. Check if screws are attached every time you use the e-scooter.