Vaya V9, User Manual, Page: 12 / 16

PO-1684
12
Note: If a fault or damage occurs in the scooter, you must immediately stop using the product and contact after-sales
support for assistance. Any further damage or fault that occurs because of the use of a damaged product will nullify
the warranty.
ADJUSTING THE DISC BRAKE
If the brakes are too tight or too loose then use the included hex-key on the bolt that holds the brake cable in position.
Loosen the bolt.
To tighten the cable tension: Decrease the length of the brake cable.
To loosen the cable tension: Increase the length of the brake cable.
FINE-TUNE THE BRAKE CABLE TENSION
To tighten the cable tension,
turn counter clockwise.
To reduce the cable tension, turn clockwise.
NOISE FROM THE BRAKE
- Brake disc needs to be cleaned.
- Brake pads need to be cleaned or grinded down.
- Brake pad is worn out and need to be replaced.
- Brake disc is damage. Try slightly bending it away from where it touches the brake pads.