Using your machine
Press dirty water tank
release latch, pull to remove.
Lift to remove dirty water tank
lid. Empty dirty water over the
sink. Rinse dirty water tank and
lid under water to remove debris.
Lift dirty water tank clips up and outward to release.
Clean the filter screen located at
the back of the dirty water tank.
Emptying and cleaning the dirty water tank
IMPORTANT:
Your dirty water tank is fitted with a float. When the dirty water tank is full, or the floor head is not in
contact with the carpet the float will shut off the suction on the carpet washer. You will be able to hear if this has
happened as the motor noise on the machine will increase. Once the float is activated, empty the dirty water tank if full.
If the dirty water tank is not full then turn off your machine at the power switch and wait for the float to settle.
To re-fit, tilt dirty water tank
and line up to carpet washer.
Push back until it clicks
into place.
Taking care of your machine
Summary of Contents for W86-DD-B, Dual Power Max
Page 1: ...Dual Power Max Let s get started W86 DD B vax co uk...
Page 17: ...Notes...
