Using your machine
Using the wash tool
Pull down accessory hose connector cover.
Push hose end and hose solution connector into hose
and solution connection port.
Slide upholstery tool over
tab at end of hose until
it clicks into place.
Squeeze solution trigger
to release water and
solution mix.
Plug into mains. Press the
on/off button to switch on.
Move wash tool forward
and backwards without
squeezing the solution
trigger to pick up.
NOTE:
The carpet washer should be in the upright position when using the hose, de-activating the dual brush bar.
TIP
For heavily soiled areas, it may
be necessary to repeat the cleaning
process. Make crisscrossing strokes
to the original pattern and overlap
each pass.
Taking care of your machine
Summary of Contents for W86-DD-B, Dual Power Max
Page 1: ...Dual Power Max Let s get started W86 DD B vax co uk...
Page 17: ...Notes...
