Using your machine
Charging the battery
WARNING:
Do not use the vacuum cleaner when the machine is plugged in and charging.
NOTE:
Once the battery is fully depleted the vacuum will still turn on for a few seconds. Plug in the charger until
fully charged. The machine can remain on the battery charger once fully charged. The life expectancy of the
battery will vary depending on the usage of the vacuum cleaner.
White light flashing – The battery is charging.
White light – The battery is charged (after 4 hours).
Red light – The battery is low.
If charging for the first time the initial charge time is 4 hours.
Getting started
Using as a stick vacuum cleaner
To turn the machine on,
press the on/off button
located on the handle.
To activate and deactivate
the brushbar, press the
brushbar on/off button
located on the dial.
The machine will always
start with the brushbar
turned off.
For additional cleaning
time, deactivate the boost
mode located on the dial.
The machine will always
turn on in boost mode.
CAUTION:
For use on delicate hard floors, the brushbar must be turned off to enable slow suction.
To prevent any damage being sustained test on an inconspicuous area of the flooring.
When the vacuum cleaner
is in use the charging
lights will indicate how
much charge is remaining.
When the first bar starts
to flash red this indicates
the battery is running low
(<25%).
Place your foot on the
Powered Head and pull
the handle backwards
to recline.