Vax VX60 Manual Download Page 3

Let’s talk safety

Don’ts

Do’s

•  Do not pull or carry by charger cord, use cord as a handle, close a door on cord, or 

pull cord around sharp edges or corners. Do not place product on cord. Do not run 

appliance on cord.

•  Don’t handle the charger plug or use the vacuum cleaner with wet hands.
•  Don’t use this vacuum cleaner if it has been dropped, damaged, immersed in water or 

left outdoors.

•  Don’t leave the vacuum cleaner in one spot for an extended period of time when the 

brushbar is activated. This vacuum cleaner is fitted with a rotating brushbar which if 

left in one place may cause damage to the floor surface.

•  Don’t attempt to remove blockages with sharp objects as this may cause damage to 

the vacuum cleaner.

•  Don’t try to short the terminals of the battery and the charger.
•  Don’t use the vacuum cleaner with incorrect voltage as this may result in damage or injury to the user. 

The correct voltage is listed on the rating label.

•  Don’t vacuum up hot coals, cigarette butts, ash, matches or smoking hot burning items or use in an 

area where there may be harmful fluids (chlorine, bleach, and ammonia drain cleaner).

•  Do not vacuum hard or sharp objects such as glass, nails, screws or coins etc.
•  Do not vacuum plaster dust, concrete dust or any other building or vitreous material.
•  Do not vacuum flour, baking soda or any other powder-based carpet refresher or deodoriser.

•  Always make sure the filter and dirt container are fitted correctly before using 

your vacuum cleaner.

•  Always turn off and unplug from charger and remove the battery before carrying 

out any maintenance.

•  Turn off all controls on the vacuum cleaner before disconnecting or connecting the battery.
•  Take extra care when cleaning on the stairs.
•  Always protect the charger cord from heated surfaces or near open flames.
•  Keep all openings clear and free from debris as this may affect the airflow/suction.
•  Store your vacuum cleaner in a cool, dry area. If filters have been cleaned as per 

user guide instructions ensure they are thoroughly dry before storing away.

•  Always use the charger supplied with the vacuum cleaner.
•  Use only SAA approved 10amp extension cords. Care should be taken to arrange 

the extension cord as it can be a trip hazard.

•  Always carry the vacuum cleaner by the handle.

•  Store your vacuum cleaner in a cool, dry area. Store the battery pack in a “charged” condition. 

Minimum 30-50% charged for best battery life.

CAUTION:

 The battery used in this device may present a risk of fire or chemical burn if mistreated.

Do not disassemble, heat or incinerate.
Replace battery with Vax battery only. Use of another battery may present a risk of fire or explosion. 

Dispose of used battery promptly. Keep away from children.
Do not disassemble and do not dispose of in fire. Do not attempt to disassemble the battery or remove 

any component projecting from the battery terminals.
The battery and charger have no user serviceable parts. Fire or injury may result.
Prior to disposal, protect exposed terminals with heavy insulating tape to prevent shorting.

WARNING:

 For best performance terminals on battery, battery charger and vacuum cleaner must be 

clean and free from dust and dirt.
Do not attempt to recharge non-rechargeable batteries.

Summary of Contents for VX60














Reviews: