7
belt & brush replacement / clearing blockages
8. Clearing Blockages
WARNING : To reduce the risk of electric shock,
the power cord must be disconnected before
performing maintenance/ troubleshooting checks.
Turn the vacuum cleaner off and unplug from the
electrical outlet.
Hose Blockages
The flexible hose may be disconnected from the vacuum
cleaner. Carefully remove any blockages found and
reconnect hose securely.
Accessory Blockages
Remove accessory from hose handle/ tube. Carefully
remove the blockage and return to the cleaner.
9. Troubleshooting
WARNING: To reduce the risk of personal injury,
unplug the vacuum cleaner before performing
maintenance or troubleshooting checks.
PROBLEM: Vacuum cleaner won't run
Cause:
Not properly plugged into electrical outlet.
Solution:
Plug in firmly.
Cause:
Blown fuse/tripped breaker.
Solution:
Reset circuit breaker or replace fuse.
Cause:
Thermal cut out.
Solution:
Refer to page 3 for information.
PROBLEM: Cleaner won’t pick up/loss of suction.
Cause:
Lower hose not connected properly.
Solution:
Refer to page 4 for fitting information.
Cause:
Dirt container not installed correctly, or full.
Solution:
Review dirt container replacement.
Cause:
Broken or worn belt.
Solution:
Replace the belt.
Cause:
Clogged filters.
Solution:
Remove, clean and replace filters.
Cause:
Nozzle / hose or hose inlet is clogged.
Solution:
Remove nozzle/hose and obstruction.
PROBLEM: Dust escaping from the vacuum cleaner.
Cause:
Dirt container full.
Solution:
Empty dirt container.
Cause:
Dirt container not installed correctly.
Solution:
Review dirt container replacement.
Cause:
Hose not installed properly.
Solution:
Review vacuum cleaner assembly.
!
!
Vax Careline (UK) 0844 412 8455
(ROI) 1-800 928 308
