To access water filter
unscrew water inlet
connector and remove.
Always store tools, power cord and pressure hose
into allocated storage slots.
Maintenance
Storage
Let’s talk technical
To remove water filter,
pinch the inner water
filter tab with pliers
and gently pull.
Water filter can be rinsed
under running water
periodically.
Using your machine
IMPORTANT:
Always rinse fresh water through your pressure washer and accessories for 1 minute after using
solution to prevent blockages.
IMPORTANT:
If using the pressure washer with water from a water butt, the water filter will need
to cleaned more frequently
IMPORTANT:
Before storing your machine always make sure no water remains in the pressure washer, hose/
accessories. Once machine is switched off and before removing the nozzles, lance or trigger handle always squeeze
the trigger until no more water comes out, to prevent frost damage. Keep in a dry place above zero degrees and out
of the reach of children.
Removing a blockage in the lance and nozzles
To remove the lance from trigger
handle firmly push and twist
the lance anti-clockwise, when
unlocked pull to remove.
To remove the nozzles press the
nozzle release button and pull.
Insert the nozzle cleaning
tool into the end of lance
and nozzles to remove
any dirt or debris.
Before carrying
out any maintenance
make sure the machine
is switched off
and unplugged.
CAUTION
To remove the lance from the trigger
handle firmly push and twist the lance anti-
clockwise. When unlocked pull to remove.
