Using your machine
Unhook the solution tube and insert into the
solution bag. Solution only dispensed with
the trigger handle, lance and solution nozzle,
or car/outdoor/rotary brush if supplied.
Switch the machine on and squeeze trigger to dispense
the water and solution mix.
After use rinse the pressure washer to prevent blockages.
Inset the solution tube into a bucket of fresh water
(Max 40�C), turn the machine on and squeeze
the trigger for 1 minute.
Using solution with your pressure washer
IMPORTANT:
When using solution make sure you follow the dilution instructions and use Vax solution only.
IMPORTANT:
Always make sure the solution tube is fully submerged into the solution/water
mix inside the solution bag.
To remove hose,
lance, nozzle or
accessories always
squeeze trigger until
water stops to release
pressure build up
CAUTION
Solution can only be used when the solution nozzle or car/outdoor/rotary brush nozzle is attached.
Solution cannot be used with Jet and Turbo Nozzles.
To attach the turbo nozzle, fit the lance with
a firm push and twist clockwise to lock into place.
Hold down the release button on the lance, push the
turbo nozzle and lance firmly together until you hear
an audible CLICK. Release the button and gently pull the
turbo nozzle to make sure it is locked secure before use.