6
accessories / dirt container & filter
Treads and Risers tool
(Some models
only)
: for stairs, upholstery and
curtains. Twist the head tool for best
contact with stair treads and risers.
TurboTool
(Some models only)
:
Make sure the cleaner is
turned off before fastening TurboTool. Attach TurboTool
to hose end as all other accessories. For best pick up use
backward strokes on the surface being cleaned.
6. Dirt Container and Filter:
Removal and Replacement
1.
Make sure the vacuum cleaner has been switched off
and unplugged from the mains supply. To remove the dirt
container from the vacuum cleaner press the release catch
and pull it forward.
To remove the lid of the dirt container hold the top and the
side handles firmly and turn the lid anti-clockwise. Pull the
lid away from the body of the dirt container.
Empty the all the dust and dirt from the dirt container
(Fig.6/1).
2.
The filter inside the dirt container should be replaced
every 12 months. It should be cleaned each time the dirt
container is emptied. Remove it by grasping the ring at the
top of the filter.
Twist and pull the filter out. To clean it, tap it gently
against the side of a dustbin. Do not use a brush to clean
it as this may damage the filter. The filters can be washed
by rinsing the outer part only under cold running water.
Allow 24 hours to dry before replacing back into vacuum.
Replace the filter into the dirt container. Push it firmly into
place to prevent dust and dirt leaking out. Replace the
canister lid turning clockwise and return the dust (Fig.6/2).
Fig.6/1
Fig.6/2
vax.co.uk
U89-AS Series User Guide:VS-190 User Guide 18/03/2011 14:39 Page 6
