• Don’t touch any hot areas/accessories on your steam mop
• It’s normal for the steam mop and accessories to heat up during use,
always allow them to cool down before handling
• Don’t use the steam mop if it has been dropped, if there are visible signs of
damage or if it is leaking, if it has been immersed in water or left outdoors
• Don’t handle the plug or use the steam mop with wet hands
• Don’t pull or carry this steam mop by the power cord
• Don’t use the power cord as a handle, pull the power cord around corners
or sharp edges or close a door over the power cord
• Don’t attempt to remove blockages with sharp objects as this may cause
damage to the steam mop, remove blockages only as instructed in this guide
• Don’t unplug steam mop by pulling on the power cord or run over the
power cord. If the power cord or plug is damaged please contact our
Customer Care Line
• Don’t aim the steam mop at people, animals, plants and electrical
components such as interior of ovens or wires.
• Never touch the floor head from a short distance (there is a risk of scalding)
• Don’t use the steam mop with incorrect voltage as this may result in damage
or injury to the user. The correct voltage is listed on the ratings label
• Don’t leave this steam mop unattended while it is connected to the supply mains
• Don’t use this steam mop with a damaged cord or plug. If the supply cord is damaged
return the steam mop to a Vax authorised Service Agent
• Don’t use without the tank cap in place. Ensure that the water tank cap has been screwed
down fully before use
• Don’t use the steam mop to treat any items of clothing that are still being worn on the body
• Never immerse the steam mop in water or in other liquids
• Don’t operate the steam mop without water in the tank
• Don’t use the unit on leather, wax polished furniture or floors, synthetic fabrics, velvet
or other delicate steam or water sensitive materials
• Don’t use on acrylic surfaces
• Don’t overfill the tank. Do not exceed the maximum prescribed filling level. Please use the
measuring jug and funnel included
• Don’t use without the hard water filter in place
WARNING:
Never leave the steam mop in one spot on any surface for an extended period
of time as this may damage the floor surface.
• Store the steam mop in a cool, dry area away from children
• Before storing the steam mop please ensure all water/detergents tanks and hard water
filter are thoroughly clean and dry
• The force and heat of the steam may have an adverse effect on some materials. Always
check whether a surface is suitable for treatment with the steam by carrying out a test
before hand on a concealed area
• The steam mop must be kept level during operation.
• Always remove the mains plug from the socket and allow the steam mop to cool down
completely before topping up with water
• In wet rooms, e.g. bathrooms, connect the appliance to sockets with an RCD adaptor
connected in series.
• Be very careful when cleaning tiled walls with sockets.
WARNING:
Always switch off and unplug the steam mop from the electrical outlet before
assembling, opening or emptying the water tank, or before connecting/disconnecting
the attachments.
PLEASE KEEP INSTRUCTIONS FOR FURTHER USE.
