Taking care of your machine
Cleaning the dirty water tank
Replacing the dirty water tank
Rinse the dirty water tank and top thoroughly, with warm water.
You should allow them to dry fully before replacing them on your cleaner to prevent mildew.
Do not use any chemicals in the cleaning process.
Lift the front of the carpet cleaner
base off the carpet with one hand.
Grasp the handle and hook the front
of the dirty water tank into the base,
making sure that the front of the dirty
water tank is resting on the base.
Failure to install the dirty water tank
correctly will result in poor dirty
water pick up.
While making sure the dirty water
tank is resting on the base, place
the rear of the tank into the base
of the cleaner, push down on the
handle until it latches.
Replace top of dirty water tank
by pressing it into place.
