8
9
4
5
6
Emptying the dirt water tank
To empty the water tank grasp the
handle with one hand and nozzle
with the other and empty into the
sink.
Rinse the dirty water tank and filter
thoroughly, with warm water. You
should allow them to dry fully
before replacing them on your
cleaner to prevent mildew.
Do not use any chemicals in the
cleaning process.
Lift the front of the carpet cleaner
base off the carpet with one hand.
7
8
Emptying the dirty water tank
Grasp the handle and hook the front of the dirty water cleaner into the base,
making sure that the front of the dirty water tank is resting on the base.
The dirty water tank has three tabs on the underside which MUST latch on to the
underside of the base of the cleaner. The base must be lifted so that the nozzle is
flush with the base of the cleaner.
Failure to install the dirty water tank correctly will result in poor dirty water pick up
While making sure the dirty water
tank is resting on the base, place
the rear of the tank into the base of
the cleaner, push down on the
handle until it latches.
Empty and rinse clean water tank
after use.
Cleaning the dirty water tank
Replacing the dirty water tank
