background image

Getting to know your appliance 

Getting started

Filling the water tank

With the iron disconnected 

from the mains open the 

water fill cover.

Tilt the iron forwards. 

Using the jug provided fill 

the water tank up to the 

Max fill line.

Close the water fill cover.

Before you begin 

 

CAUTION:

 The soleplate becomes very hot during use. Always allow the iron to cool down before carrying out any 

maintenance or trouble shooting. Do not use hot or boiling water to fill the water tank. Don’t over fill the water tank 

or exceed the maximum amount required. Always unplug from the mains before topping the tank up with water. 

Always switch off the iron and allow to cool before emptying the water tank.

IMPORTANT:

 When using the iron basic safety precautions should always be observed.

Don’t aim the steam jet at people, animals, plants and electrical components or wires. Never touch the steam jet 

(there is a risk of scalding).
Before first use remove labels and all packaging. 
Always make sure the water fill cover is closed correctly before use.

NOTE:

 The iron can be filled with tap water. For hard water areas we recommend the use of distilled or 

demineralised water. Half fill the water tank with distilled or demineralised water and top up to the ‘Max’ line  

with tap water.
Do not add perfume, vinegar, starch, descaling agents, ironing aids or other chemicals to the water tank.
When filling make sure the appliance is unplugged.

Technical Specification

Name 

Power Shot

Model number 

ICC2V1MP

Power input 

Please refer to rating label

Tank capacity 

400ml

Weight 

1.3kg

Subject to technical change without notice.

Steam boost button

Heating indicator light 

Water tank

Spray burst button

Steam control

Water fill cover

Soleplate

Power cord

Handle

Temperature 

control dial

Spray  

burst nozzle

Self clean button

Summary of Contents for PowerShot ICC2V1MP










Reviews: