background image

SAFETY GUIDE

2

support.vax.co.uk

This machine is intended for 

household use only and NOT for 

commercial or industrial use.
PLEASE KEEP INSTRUCTIONS FOR 

FURTHER USE AND USE ONLY AS 

INSTRUCTED IN THIS GUIDE.
DON’TS

• Don’t leave the charger plugged in 

when unattended.

• Don’t use the machine if it is faulty 

or has been dropped, damaged or 

left outdoors.

• Don’t use the machine to pick up any 

flammable or combustible materials 

(lighter fluid, petrol, kerosene etc.)

or use the machine in an area with 

explosive vapours or liquid.

• Don’t use the machine to pick up hot 

coals, cigarette butts, matches or 

smoking hot burning items or use in 

an area where there may be harmful 

fluids (chlorine, bleach and ammonia 

drain cleaner).

• Don’t handle the charger, battery or 

use the machine with wet hands.

• Don’t unplug the charger by pulling 

on the power cord.

• Don’t use the charger if the charger 

cord or plug is damaged.

• Don’t attempt to remove blockages 

with sharp objects as this may cause 

damage to the machine.

• Don’t use the machine with the 

incorrect battery or charger as this 

may result in damage or injury to the 

user. The correct battery charger 

information is listed on the battery 

pack ratings label. 

• Don’t charge the battery outdoors, or 

leave the charger connected to the 

mains when not in use.

• Don’t use this machine with a 

damaged battery. If the battery is 

damaged contact us on: 

08000 

927737

.

• Don’t carry the machine while it’s 

switched on.

DO’S

• Only VAX ONEPWR batteries 

(BV15020/BV15030/BV25040) and 

charger (BV05100UK) should be 

used with this machine. 

• Only VAX ONEPWR recommended 

charger, batteries, tools and 

accessories should be used with this 

machine.

• Refer to the floor manufacturer’s 

care recommendations before use. 

Test your flooring - run the machine 

over a small hidden area, if no 

damage or discolouration occurs 

continue cleaning. Not suitable for 

use on water sensitive flooring.

• Always remove the battery from the 

machine before carrying out any 

maintenance or if storing unused for 

a long period of time.

• Keep all openings clear and free 

from debris as this may affect the 

airflow/suction.

• Turn off all controls on the machine 

before disconnecting or connecting 

the battery.

• Always protect the charger power 

cord from heated surfaces or near 

open flames.

SAFETY GUIDE

Summary of Contents for ONE PWR CORDLESS GLIDE CLHF-GLBS
















Reviews: