Vax Service line
AU: 1300 361 505 / NZ: 0800 800 900
6
Maintenance
Dirt Container & Filter:
Removal and Replacement
WARNING:
To reduce the risk of injury from moving
parts, unplug before servicing.
NOTE:
Unplug the vacuum cleaner before changing filter.
NOTE:
For best performance, replace filter annually
depending on level of use.
Dirt Container & Filter:
Removal and Replacement
1. Make sure the vacuum cleaner has been switched off
and unplugged from the mains supply. To remove the
dirt container from the vacuum cleaner press the release
catch and pull it forward.
2. To remove the lid of the dirt container hold the top and the
side handles firmly and turn the lid anti-clockwise. Pull the
lid away from the body of the dirt container.
Empty all the dust and dirt from the dirt container.
1. The filter inside the dirt container should be replaced every
12 months, depending on level of use. It should be cleaned
each time the dirt container is emptied.
2. The actual filter is located underneath the filter shroud.
Remove it by grasing the tip of the shroud, twist and pull
up as per the image below.
3. To clean the filter, tap it gently against the side of a dustbin.
Do not use a brush to clean it as this may damage the filter.
The shroud can be rinsed under water if necessary
- no scrubbing.
4. Replace the filter into the dirt container. Push it firmly into
place to prevent dust and dirt leaking out. Replace the
canister lid turning clockwise and return the dust container
to unit.
1
2
3
4
1
2
3
4
5
1
2
3
4
