7
Using your machine
Using the Extra wide 2-in-1 wash tool / Messy clean up tool
For spills, always pick up
the excess liquid before
using water/solution.
Tilt the tool forward onto
the spill and pull back.
Press the trigger on the
wash tool to release
water and solution.
Use the brush to agitate
any stubborn stains,
scrubbing back and forth.
Tilt the nozzle forward so
the nozzle is in contact
with the surface. Pull back
to recover the water and
solution.
Using the crevice tool
Press the trigger on the
crevice tool to release
water and solution.
Use the brush to agitate
any stubborn stains,
scrubbing back and forth.
Turn the tool over and tilt the
nozzle forwards so the nozzle
is in contact with the surface.
Pull back to recover the water
and solution.
Slide the tool over the tab
at the end of the hose
until it clicks into place.
Press the trigger on the
spinscrub hand tool to
release water and solution.
Use the brush in a forwards/
backwards motion to agitate
any stubborn stains.
Tilt the nozzle forward so the
nozzle is in contact with the
surface. Pull back to recover
the water and solution.
Using the SpinScrub hand tool
IMPORTANT: Over or under tilting the
hand tool may result in poor water
pick up.
