Line up the floorhead with
the main body and push
firmly into place.
Fix the wall clip to your wall using the screw and wall plug provided. During storage
and charging, secure your vacuum cleaner handle into the wall clip.
Lift the handle in a hinge
like manner and secure
onto the main body.
Assembling your 2-in-1 vacuum cleaner
Getting started
*
To purchase consumables and accessories, please visit
vax.co.uk
PLEASE READ ‘LET’S TALK SAFETY’ BEFORE USE
Before you begin
CAUTION:
Always switch off the vacuum cleaner before connecting or disconnecting the handheld/attachments or removing
and emptying the dirt container.
CAUTION:
Ensure the battery is removed from the vacuum cleaner before it is scrapped. The vacuum cleaner must be
disconnected from the supply mains when removing the battery. The battery must be recycled or disposed of in an
environmentally sound manner.
IMPORTANT:
The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the
thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner off. Remove and empty the
dirt container also check the vacuum cleaner for blockages. Allow the vacuum cleaner to cool for approximately 1 hour (if you have
cleaned the filter please wait 24 hours for the filter to fully dry before putting back into the machine). For best cleaning results,
filters require cleaning at least every 3 to 6 months. If the vacuum cleaner is blocked, switch off before removing the blockage.
CAUTION:
This vacuum cleaner has a constantly rotating brushbar. Never leave the vacuum cleaner in one spot for an extended
period of time as this may damage the floor surface.
Store the 2-in-1 tool on
board the vacuum cleaner
by pushing the tool firmly
into the tool holder located
on the handle.
NOTE:
To fold the handle for storage, push in the handle recline button and fold handle all the way back.