Vax H85-D-B14 Let'S Get Started Download Page 16

Page: 16 / 16

GET IN TOUCH

0330 026 8455

VaxVacuums

[email protected]

vax.co.uk

@VaxUK

EEC Statement of Compliance:

Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the

H85-D-B14 and H85-D-B18 and are manufactured in compliance with the following Directives:

Safety

: 2006/95/EC Low

Voltage Directive.

EMC

: 2004/108/EC Electromagnetic Compatibility Directive.

This marking on the product(s) and/or accompanying documents means that used electrical and electronic equipment

(WEEE) should not be mixed with general household waste. For proper treatment, recovery and recycling, please

take this product(s) to designated collection points where it will be accepted free of charge. Disposing of this product

correctly will help save valuable resources and prevent any potential negative effects on human health and the

environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for

further details of your nearest designated collection point.

Technology Ltd and is registered in the EU and may be pending or registered in other countries.

Summary of Contents for H85-D-B14

















Search results

Summary of Contents for H85-D-B14

Reviews:

Brands by name

Popular brands

Vax H85-D-B14, Let'S Get Started

Search results

Summary of Contents for H85-D-B14

Reviews:

Brands by name

Popular brands