Hard floor cleaning
Using your machine
Using your machine
Hard floor cleaning tool.
Line up floor tool with base of vacuum
cleaner, push it until it clicks into place.
Lie vacuum cleaner on its
back exposing brush bar.
Hold vacuum cleaner with brush bar over tread of stairs.
Using on the stairs
Always raise the height of the brush bar to hard floor setting when using the
vacuum cleaner on lino and hard floor.
TIP
Filters require cleaning at least
every three months.
This vacuum cleaner
has a constantly rotating
brush bar. When cleaning
on stairs raise the height
adjuster dial to the highest
setting. The brush bar
must overhang the stair
tread. Always take care
when cleaning stairs.
WARNING
TIP
For best performance use your
vacuum cleaner with only the
accessory hose attached.
Plug vacuum cleaner into the
mains, switch on. Turn brush
bar height adjuster dial to
desired setting.
Press On/Off button to
switch on.
Place foot on floor head
and pull handle to recline.
Pull hose out of hose
to machine connector.
Attach accessory
to tube/hose.
Attach accessory hose to
extension hose.
If required attach extension
hose to extension tube.
Using accessories
Choose an accessory.
The accessories can be attached to the extension tube or directly to the hose.
When using accessories on the hose/extension tube raise the height adjuster to the highest setting.
IMPORTANT: Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/
attachments, or removing and emptying the dirt container.
U86-FN_Pe_FlairEasy-Store_UG_[J2543]_Amd_01.07.14.indd 8-9
01/07/2014 14:15
