9. Troubleshooting
WARNING: TO REDUCE RISK OF PERSONAL INJURY, UNPLUG VACUUM CLEANER BEFORE
SERVICING
PROBLEM: Cleaner won’t run
Cause:
Not properly plugged into wall outlet.
Solution:
Plug in firmly.
Cause:
No electricity in wall outlet.
Solution:
Check fuse or breaker.
Cause:
On/off switch not turned on.
Solution:
Push on/off switch to on.
Cause:
Motor thermostat has tripped.
Solution:
Switch off and unplug cleaner. Leave for 1 hour before switching the cleaner back on.
Cause:
Blown fuse/tripped breaker.
Solution:
Reset circuit breaker or replace fuse.
PROBLEM: Cleaner won't pick up
Cause:
Full or clogged dirt container.
Solution:
Clean dirt container.
Cause:
Wrong pile height setting.
Solution:
Adjust carpet height adjuster.
Cause:
Clogged nozzle.
Solution:
Remove obstruction.
Cause:
Clogged dirt inlet.
Solution:
Remove power head cover and remove obstruction.
Cause:
Clogged hose.
Solution:
Remove obstruction.
Cause:
Broken belt.
Solution:
Replace belt.
Cause:
Hose not inserted fully.
Solution:
Push hose in securely.
Cause:
Dirty filters or debris screen.
Solution:
Clean/change filters or debris screen.
PROBLEM: Accessories won't pick up
Cause:
Accessories not attached correctly.
Solution:
Refer to page 6 and 7 for fitting information.
PROBLEM: Cleaner picks up moveable rugs or pushes too hard
Cause:
Wrong carpet height setting.
Solution:
Adjust carpet height adjuster.
PROBLEM: Brushbar does not turn
Cause:
Broken belt.
Solution:
Replace belt.
Cause:
Belt installed incorrectly.
Solution:
Check belt changing and brushbar cleaning.
Troubleshooting
10
Vax V-041/2 9th.qxd 2/23/05 12:34 PM Page 10