Don’t over fill the dirt container
to avoid blocking the air flow
through the vacuum cleaner.
WARNING
Emptying and cleaning the dirt container
Cleaning the shroud
Using your tools
Using your machine
Taking care of your machine
Taking care of your machine
Always use the carry handle to lift and
carry the machine. Do not use the dirt
container handle.
Choose an accessory and
push onto the telescopic
extension tube or hose.
Press dirt container
release button and lift
to remove.
Press the button at the
top of the dirt container
to release filter.
Hold dirt container over
a bin allowing dirt/debris
to fall out.
Replace lid, making sure
central protruding (part A) is
over outer protruding piece
(part B) to complete the hinge.
Attach accessory to hose end. If required use tool connector.
Rinse both dirt container and shroud under water
(Max 40°C). Leave to dry for 24 hours or until fully
dry before placing back in the machine.
Carrying your machine
IMPORTANT: Unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks.
IMPORTANT: The shroud cannot be removed from the dirt container.
A
B
Cleaning the pre-motor filter
Press dirt container release
button and lift to remove.
Leave to dry for 24
hours or until fully dry
before placing back in
the machine.
Line up the pre-motor filter frame with dirt container,
push into place.
If the pre-motor filter is not correctly fitted the pre-
motor latch will prevent the dirt container from locking
into place.
Tap the filter frame and
foam over a bin to remove
any dirt/debris.
Remove the pre-motor
filter together with frame
and foam.
Rinse both the frame
and foam under water
(Max 40°C).
Warning: Do not wash the pre-motor filter in the washing machine or dishwasher.
For best cleaning results clean the pre-motor filter every time the dirt container is emptied.
