162
Vehicle care
4. Remove bulb by turning
anticlockwise slightly and
withdrawing. Replace the bulb.
5. Insert the bulb socket into the
assembly and turn clockwise.
6. Replace light assembly in the
bumper and fix with the screw.
7. Insert cover into the bumper and
fix with the screw.
Side turn signal lights
To replace bulb, remove lamp
housing:
1. On left vehicle side, slide lamp to
the front and remove it out of the
wing with the rear end.
On right vehicle side, slide lamp to
the rear and remove it out of the
wing with the front end.
2. Turn bulb holder anticlockwise
and remove from housing.
3. Pull bulb from bulb holder and
replace it.
4. Insert bulb holder and turn
clockwise.
5. On left vehicle side: insert front
end into fender, slide forward and
insert rear end.
On right vehicle side: insert rear
end into fender, slide rearward
and insert front end.
Summary of Contents for KTA-2744/3-VX-en
