Vehicle care
173
A detected low tyre pressure
condition is indicated by the control
indicator
w
3
84.
If
w
illuminates, stop as soon as
possible and inflate the tyres as
recommended
3
206.
After inflating, driving may be
required to update the tyre pressure
values in the Driver Information
Centre. During this time
w
may
illuminate.
If
w
illuminates at lower temperatures
and extinguishes after driving, this
could be an indicator for getting low
pressure. Check tyre pressure.
Vehicle messages
3
92.
If the tyre pressure must be reduced
or increased, switch off ignition.
Only mount wheels with pressure
sensors, otherwise the tyre pressure
will not be displayed and
w
illuminates continuously.
A spare wheel or temporary spare
wheel is not equipped with pressure
sensors. The tyre pressure
monitoring system is not operational
for these tyres. Control indicator
w
illuminates. For the further three tyres
the system remains operational.
The use of commercially-available
liquid tyre repair kits can impair the
function of the system. Factory-
approved repair kits can be used.
External high-power radio equipment
could disrupt the tyre pressure
monitoring system.
Each time the tyres are replaced, tyre
pressure monitoring system sensors
must be dismounted and serviced.
For the screwed sensor; replace
valve core and sealing ring. For the
clipped sensor; replace complete
valve stem.
Vehicle loading status
Adjust tyre pressure to load condition
according tyre information label or
tyre pressure chart
3
206, and select
the according setting in the menu Tire
Load in the Driver Information Centre,
Vehicle Information Menu
3
86.
Summary of Contents for KTA-2744/3-VX-en
