Audio players
39
To record selected tracks:
1. Connect a USB device or press
the HDD/DVD/AUX button until
the DISC screen displays the
USB screen.
2. Use the
]
SEEK or SEEK
[
or
HDD menu to select a song for
recording.
3. Press the
o
REC button.
4. A confirmation displays.
5. Select the song name to record. A
progress bar displays.
Duplicate content
When the record function starts, there
is a check to verify that the content
does not already exist on the hard
drive. If the entire content of the CD
exists on the hard drive, it will not
record the content.
If it is determined that some or none
of the content exists, then only that
missing content will be copied to the
hard drive.
If the same file is recorded from the
USB and CD, it is possible to have
duplicate tracks.
CD eject
If the CD ejects before the recording
process completes, only tracks that
have been completely recorded are
stored to the hard drive. Incomplete
tracks are discarded.
Power mode
If the system is turned off during a CD
or USB recording process, it stops.
When the radio is turned back on, the
recording process does not resume
automatically.
Playing hard disc drive content
To operate hard drive functions while
the HDD source is active, use the
following buttons or touch-sensitive
buttons:
r
(Play/Pause): Press to start,
pause or resume play of the current
media source.
SEEK
[
:
1. Press to seek to the next track.
2. Press and hold to advance quickly
through playback.
3. Release the button to return to
playing speed. Elapsed time
displays.
]
SEEK:
1. Press to seek to the beginning of
the current or previous track. If the
track has been playing for less
than five seconds, the previous
track plays. If longer than
five seconds, the current track
restarts.
2. Press and hold this button to
reverse quickly through playback.
3. Release the button to return to
playing speed. Elapsed time
displays.
Summary of Contents for Ampera
Page 4: ...Introduction 3 Control elements overview...
Page 7: ...6 Introduction...
