138
Vehicle care
5. Detach bulb from bulb holder and
renew the bulb.
6. Insert the bulb holder, engaging
the two lugs in the reflector
housing and rotate clockwise to
secure.
7. Reattach wiring connector to bulb.
8. Replace protective cover.
Tail lights
Rear brake, tail, turn signal,
reverse and fog tail lights
1. Remove the upper and lower trim
panels from the rear pillar.
2. Unscrew the two nuts from the
locating pins on the rear of the
lamp assembly.
3. Withdraw the lamp assembly
rearwards from the outer side.
4. Detach wiring connector from
lamp assembly.
5. Remove the three screws from
the rear of the lamp assembly.
6. Remove bulb holder from the
lamp assembly.
