Vauxhall 2013 Corsa Infotainment system Owner'S Manual Download

Page: 39 / 227

Seats, restraints

Heating

Activate heating by pressing

button

for the seat with the ignition on.
LED in button

on: relevant front

seat heating on.
Seat heating is operational when the

engine is running and during an

Autostop.

Seat belts

The belts are locked during heavy

acceleration or deceleration of the

vehicle for the safety of the

occupants.

Warning

Fasten seat belt before each trip.
In the event of an accident, people

not wearing seat belts endanger

their fellow occupants and

themselves.

Seat belts are designed to be used by

only one person at a time. Child

restraint system

45.

Periodically check all parts of the belt

system for damage, pollution and

proper functionality.
Have damaged components

replaced. After an accident, have the

belts and triggered belt tensioners

replaced by a workshop.

Note

Make sure that the belts are not

damaged by shoes or sharp-edged

objects or trapped. Prevent dirt from

getting into the belt retractors.

Seat belt reminder

78.

Belt force limiters

In the front seats, stress on the body

is reduced by the gradual release of

the belt during a collision.

Summary of Contents for 2013 Corsa Infotainment system




































































































































































































































Search results

Summary of Contents for 2013 Corsa Infotainment system

Reviews:

Related manuals for 2013 Corsa Infotainment system

Brands by name

Popular brands

Vauxhall 2013 Corsa Infotainment system, Owner'S Manual

Search results

Summary of Contents for 2013 Corsa Infotainment system

Reviews:

Related manuals for 2013 Corsa Infotainment system

Brands by name

Popular brands