Vauxhall 2013 Antara, Owner'S Manual

Page: 69 / 213

68 Storage
The system consists of:
■ adapters,
■ variable partition net,
■ mesh pockets,
■ hooks.
The components are fitted in two
guide rails in the side walls of the load
compartment using adapters and
hooks.
Variable partition net
Insert an adapter into each rail: fold
open the handle plate, insert adapter
into upper and lower groove of rail
and move to required position.
Turn handle plate upwards to lock the
adapter. The rods of the net must be
extended before inserting into the
adapters: pull out all of the end pieces
and lock by rotating clockwise.
To install, push rods together a little
and insert into the relevant openings
in the adapters. The longer rod must
be inserted into the upper adapter.
To remove, press the net rod together
and remove from the adapters. Fold
open the adapter handle plate,
disengage from lower groove and
then from upper groove.
Hooks and mesh pocket
Insert the hooks in the desired
position in the rails: insert the hook in
the upper groove on the rail and press
in the lower groove.
The mesh pocket can be hung from
the hooks.