Vauxhall 2012 Ampera Owner'S Manual Download Page 79

Page: 79 / 195

Instruments and controls

the Colour-Info-Display, there are

also other ways to temporarily

override a delayed charge mode.
Charging

125.

To temporarily override a delayed

charge mode to immediate charge

mode from inside the vehicle:

1. Press the release button of the

charge port door on the driver

door to view the charge mode

status pop-up in the Colour-Info-

Display.

2. Press Temporary Override.

3. Press Charge Immediately on

Plug-in to temporarily override an

immediate charge mode.

The revised charge complete time will

be automatically displayed.

To cancel the temporary override to

immediate, press Cancel Temporary

Charge Mode on the bottom of the

touch screen of the temporary charge

mode screen or pop-up, respectively.
To temporarily override the next

planned departure time from inside

the vehicle:

1. Press the release button of the

charge port door on the driver

door to view the charge mode

status pop-up in the Colour-Info-

Display.

Summary of Contents for 2012 Ampera




































































































































































































Search results

Summary of Contents for 2012 Ampera

Reviews:

Related manuals for 2012 Ampera

Brands by name

Popular brands

Vauxhall 2012 Ampera, Owner'S Manual

Search results

Summary of Contents for 2012 Ampera

Reviews:

Related manuals for 2012 Ampera

Brands by name

Popular brands