Vauxhall 2012 Ampera Owner'S Manual Download

Page: 58 / 195

Instruments and controls

Do not connect any current-delivering

accessories, e.g. electrical charging

devices or batteries.
Do not damage the outlets by using

unsuitable plugs.

Warning lights, gauges

and indicators

Speedometer

Indicates vehicle speed.
The shown unit can be changed in the

Driver Information Centre (DIC).
Driver Information Centre (DIC)

67.

Odometer

Displays the recorded distance.

Trip odometer

Displays the used fuel, average fuel

economy and recorded distance

since the last trip reset.
Reset the trip data by pressing and

holding the SELECT button located

left to the steering wheel when either

trip A or trip B is displayed.
The trip odometer is within the Driver

Information Centre (DIC).
Driver Information Centre (DIC)

67.

Fuel gauge

This indicator displays the fuel level.
When this indicator is in the

foreground, the vehicle is operating in

extended range mode.
The value next to the indicator

displays an estimate of how far the

vehicle can be driven while in this

mode.
Extended range mode

106.

Summary of Contents for 2012 Ampera




































































































































































































Search results

Summary of Contents for 2012 Ampera

Reviews:

Related manuals for 2012 Ampera

Brands by name

Popular brands

Vauxhall 2012 Ampera, Owner'S Manual

Search results

Summary of Contents for 2012 Ampera

Reviews:

Related manuals for 2012 Ampera

Brands by name

Popular brands