11 — Power-up the system:
Turn on the Aris Controller using the front-panel switch — a string of front-panel
lights indicates that the controller is running.
Install batteries in the RC-8-RF and/or RC-8-IR remote controls. Alkaline, Heavy-Duty Carbon, or
rechargeable Nicad batteries may be used. Please dispose of used batteries at a recycling center. More
information about battery use and disposal may be found on page 4 of this manual.
The RC-8uses three (3) “AAA” batteries to power it. These batteries will last up to 6 months under normal
conditions, depending on usage. Be certain to observe polarity markings when installing batteries.
NOTE: When changing the batteries, lay the remote control keyboard-down on a flat surface; protrusions
on the case prevent the keys from being pressed. Remove the old batteries and
replace with new batteries
WITHIN ONE MINUTE
. This process will ensure that the user-selectable settings are not changed. If you
want to restore the factory settings, remove the old batteries, press a key, and let the remote control sit for
a minute or so before installing the new batteries — upon battery insertion, the red light will flash twice to
indicate that the factory settings have been restored.
24
