Observe the danger information in the operating and
assembly instructions
For use in interior areas
Protection class II – the drive system is protection isolated
Int. 10 %
2 min / 18 min
Only use the drive system intermittently! After a maxi-
mum of 2 minutes continuous operations, do not use for
at least 18 minutes!
Symbol for compliance with the norms and regulations
which are relevant for the given intended use
7.
SYMBOLS USED
8.
LABEL
The label is positioned on the side of the external pipe of
t
the telescopic column.
The buttons must be held down to set in the respective direction
Important note:
The
operating element
can be used to drive the system inwards and outwards at any height.
When using the
remote control
, the system can be driven in to the lower final position but can only be driven out up to the
maximum drive out level set on the
operating element
. This enables the user to always precisely set the previously set maxi-
mum upper drive out position of the TV with the
remote control
.
The defined height position can only be changed with the
operating element
by driving the TV lift with the operating element to
the required height and only undertaking further settings with the
remote control
.
Warning:
if the lowest position is driven with the operating element, the system records this as a maximum drive out height
and setting with the remote control is no longer possible. The system must be set to the required drive out height once again by
using the operating element.
9
Vauth-Sagel Systemtechnik GmbH & Co.
D-33034 Brakel-Erkeln Neue Str. 27 Tel. 05272/601-01
Article/type:
TV lift system
Mains voltage:
230V 50 Hz
Input power:
400 W
Operating mode:
inter. 2 min/18 min
Max. load:
60 kg
Customer order no:
31054266
Series no:
001
Year of construction:
10/2008
“Drive in”
button
“Drive out”
button
“Drive in”
button
“Drive out”
button
Operating element
Remote control (optional)
