8
TV switch-off connections
Control box 2
(IN)
Mains plug
Control box – mains connection
(CB)
TV mains connection
(TV)
(With automatic switch-off)
Additional unit – mains connection
(AUX)
(With automatic switch-off)
Illustration 3
6.
OPERATION
For version with remote control:
Before the system can be set with the remote control, the remote control and the wireless receiver must be aligned (wireless
receiver stores the remote control’s identification code). This alignment also ensures that no external signals can control the
system.
The alignment process:
Press and hold in the reset button on the wireless receiver
using a pen or a similar object. Press one button on the remote
control at the same time. Then release the button and the reset
button. The alignment is then completed and the system can be
controlled with the aligned remote control.
Note:
The functional range of the remote control is approximately 6 m. Depending on the environment in which the remote control is
used, this range may be smaller. Under certain circumstances, it is possible that other equipment which uses the same trans-
mission frequency can cause faults. These faults can cause the TV lift to stop during operation but external signals cannot
activate the system. If the system stops due to these faults, it can be driven again after releasing the operating button.
B
