19
5.10 Setting alarm clock as reminder
The blood pressure monitor has an alarm clock function that allows you to set two
alarm times. This can be a useful aid, for instance, as a reminder to take
medication or perform blood pressure measurement at the same time each day.
1.
To set the alarm, first switch off the device. Press and hold the Time/User
button
, then press and hold the Memory button
(both buttons
must be held down) until the Alarm Clock symbol
appears on the
display. Release both buttons and you will see flashing “1” which indicates
that the first alarm time can now be set.
2.
Press the Time/User button
and the ‘hour’ will flash. Press the
Memory button
to set the hour. To confirm, press the Time/User
button
. The ‘minute’ will now flash. You can set the minute by
following the same steps.
3.
After confirming the alarm time, the Alarm Clock symbol
will flash.
Press the Memory button
to toggle between
(alarm active) or
(alarm inactive). To confirm, press the time Time/User button
.
4.
To set a second alarm time, follow step 1 above. When the flashing “1”
appears, press the Memory button
and it will switch to flashing “2”.
The second alarm time can now be set by following steps 2-3 above.
Note:
An active alarm is indicated by the symbol
on the display.
The alarm will go off at the set time daily.
To switch off the alarm, press the Start/Stop button
.
To inactivate the alarm setting, follow steps 1-3 above and select the
inactive alarm symbol
at step 3. The symbol
will disappear on the
display.
The alarm time(s) must be re-entered each time the batteries are replaced.
Summary of Contents for vB100A
Page 11: ...7 ...
