Vauni OF Wide, Manual

Page: 6 / 40

6 |
Vauni Globe © Copyright 2015 Vauni AB - All rights reserved
ENG
3 INSTALLATION
The burner is designed to allow flexible placement in most interiors, and requires a minimum of
assembly and installation before it can be used. To ensure that the burner’s full safety is utilized,
it is important that the instructions below for assembly be followed when the burner is installed.
Keep in mind!
The burner is certified to be placed in a space with a minimum volume of 40 (48 CI Wide) m
3
(an equivalent floor area is 17 (20 CI Wide) m
2
) and with normal ventilation (0,5 exchange of
air per hour). It is important that the placement is chosen so that the flame is not exposed to
direct draught, and places should be especially avoided where the draught’s direction is against
the burner’s opening. Inflammable objects must not be placed within 1 metre from the burner.
Remember that curtains and similar objects must have a safety margin of at least 1 metre due to
risk of draught currents. (Figure 3, 7)
3.1 Assembly, installation and safety distance
The burner is to a large extent assembled already when delivered, and needs only minor post-
assembly and installation. Follow the steps below to assemble and install the product.
Note! Depending on the market and model variants, minor deviations may occur.
Preparations:
1. Remove the burner and its accessories from the package and check the items for possible
transport damage. Any damage must immediately be reported to the shipping agent and the
place of purchase.
2. Check that all parts and standard accessories specified in Section 2 are included.
3. When converting an existing wood-fired open stove or tiled stove, clean the upper part of the
burner and the smoke passages from soot, so that residue particles do not fall down into the
combustion system during operation.
3.1.1 Assembly, installation and safety distance Burner OF Wide:
1. Lower the burner module into the matching holder in the burner mantle. (Figure 1)
2. Place the regulator lid by lowering both of the guide pins into their respective grooves. When
correctly placed, the regulator lid should lie tight against the burner’s surface, and slide
easily when the lid is moved to its respective stop by means of the regulator axle. In the open
position, the lid should be located entirely in front of the burner opening, and in the closed
position it should completely cover the burner opening (Figure 2)
Installation and safety distance for OF Wide:
Note that the installation instructions below are intended as a summary illustration of a safe
installation of your burner. A more detailed description of the installation can be obtained from
Vauni AB or its representative. (www.vauni.com) In order to ensure full functionality and safety
of the installation, it is important that you contact a certified chimney-sweeper or fire expert so