Vaude Hogan SUL xp 2P, User Manual

Page: 20 / 67

13
or due to aging). To do this first remove the end cap
and then untie the knot in the cord. Retie the knot
further up the cord and replace the cap
(W) .
TECHniCaL DETaiLS:
Depending on tent models, VAUDE tents feature
the following:
fEaTUrES/faBriCS:
SILICON SEAM SEAL:
VAUDE is the only manufacturer to successfully fac-
tory seam seal siliconised tents for full waterproof
protection!
SILICONISED:
• Increases tent life by 20% - a triple coating reflects
damaging UV radiation to a much greater degree
than standard treatments.
• 8-times greater tear resistance – siliconised fabrics
attain a tear resistance of 8-11 kg compared to
1.3 kg of PU coated fabrics.
• Excellent water beading properties – water simply
beads on the surface.
• Retensioning – the Polyamid carrier material
swells up when damp or wet. The tent needs to be
retensed if rain/snow initiate.
• Sealing – siliconised materials cannot be factory
seam sealed (exception: VAUDE Silicon Seam Seal).
When camping in extremely rainy conditions we
recommend sealing all seams by hand with a silicon
seam sealer.
fLY:
SUPER LIGHTWEIGHT 20D POLYAMIDE RIPSTOP 280T
SI/SI; 3,000 MM WATER COLUMN.
• Good tear resistance thanks to extremely fine,
super lightweight yet high-tenacity polyamide
thread with reinforced cross threads.
• SI - Triple layer silicon coating on both inner and
outer sides for maximum tear strength and water
beading effect, as well as increased UV resistance.
ENGLISH