Appendix
PaX-i Plus / Insight (Model: PCH-30CS) Installation Manual
127
E
ng
li
sh
B.
Installing the Emergency Stop Switch
⚫
Install the
Emergency Stop Switch
on the power cable line.
⚫
Install this switch so that it is easy to reach in the emergency case but can’t
be pushed by mistake.
⚫
The switch shall be a type of mistake-proof.
⚫
The switch is not supplied.]
⚫
The switch shall be installed at a height of 1.2 to 1.5 meters (47 to 60”).
1.
The cable sizes: N, L, and PE≥ 12 AWG (3 x 4 mm
2
).
2.
The cable to
Emergency Stop Switch
shall be the same size as the power cable
itself.
3.
Install the socket connector terminal on the 2nd protective ground wire.
